Magic repellent is an effective, sub-surface water, oil repellent in a solvent carrier. Upon penetration into mineral surfaces, it minimizes liquids from being drawn into the pore structure by capillary action. It leaves little or no residue on absorbent stone surfaces and consequently is
invisible and very natural in appearance.
Product uses:
• marble
• slate
• limestone
• unglazed porcelain tile
• granite
• quartzite
• quarry tile
Note : always test magic repellent in an inconspicuous area to ensure product satisfaction.
Application procedure:
All surfaces must be clean, dry and free from contaminants including waxes, coating and sealants.
apply magic repellent with brush or spray.
apply evenly, buff off excess.
on very porous surfaces, allow magic repellent to penetrate deeply and apply a second coat in most cases.
on polished surface, apply sparingly and buff off any excess with a soft cloth or white pad.
product may be sprayed in some situations (usually textured surfaces) by experienced users familiar with the working properties.
Coverage:
Approximately 4-8 sqm / litre / coat, depends on porosity of the materials and method of application.
Limitation:
The product is not suitable for use in areas with excessive hydrostatic pressure. Always test on your material first to determine possible color change and suitability for your situation. The product will compromise bonding of coating and adhesives and should not be combined with acrylic
sealers.